How to Assemble Legendairy Milk's Silicone Collection Cups

By: Guest Contributor

|

0 min

Comments

Can I have the instructions for making these cups with the Elvie stride ?
———
Legendairy Milk replied:
We sent you an email with more information! Make sure to check your spam/promotions folder 😊

Dania Rodriguez

May I have the link as well please on using these cups with the elvie stride. Thank you!
Becky
———
Legendairy Milk replied:
The Elvie hack isn’t necessary for the Elvie Stride! The Stride flanges do not have the two suction holes as with the original Elvie. All you need is an insert in your correct size! The 15 mm, 17 mm, 19 mm, and 21 mm Legendairy Milk inserts fit in the 24mm Elvie Stride flange. (They will not fit into the 21 mm Elvie Stride flange.)

Rebecca Hartger

How does the cups connect to the momcozy?
———
Legendairy Milk replied:
Thank you for your question! The Silicone Collection Cups will not work with a wearable pump as there is no place to put a motor on the cups directly. These will only work with an external pump. I hope this helps clarify!

Vanessa

Do you clean the tube adapters? If so, how?
———
Legendairy Milk replied:
The parts (minus the tubing and tubing adapters) should be submerged in boiling water for 3 minutes to sterilize them before your first use. Then after each subsequent use, we recommend that you disassemble the collection cups, silicone breast shields, valves, and valve bases, rinse them with cold water, and then hand-wash them in warm, soapy water. They should then be rinsed well and allowed to air-dry on a dedicated rack or clean cloth. Using sterilizers or harsh detergents can warp the delicate silicone pieces and should be avoided. UV sterilization or cold sterilization is acceptable though!

Caroline

Do you have a video of how to make these cups work with the Elvie stride?
———
Legendairy Milk replied:
We sent you an email with instructions! 😊

Rylie
1 2 3 4

Leave a comment