Legendairy Milk Elvie Hack

When it comes to wearable, hands-free, and wire/cord-free portable breast pumps, there are only a few options and Elvie is one of them.

The Elvie is available as a single or double pump option and comes standard with a 24 mm and 28 mm flange with the option of purchasing a 21 mm flange directly from Elvie. Each flange has a size guide on the bottom to help you align your nipples properly but if you already know you need a smaller size, you end up having to find some inserts that will work within the larger flanges.

nipple with flange sowing that the flange is too large for nipple 

Because of the way the suction mechanisms work with the Elvie pump, the insert you choose must fit just right or be trimmed down to avoid blocking the holes on the Elvie flange which allow for suction.

This is where some hacks come in!

 silicone flange in elvie flange without blocking air holemaymom insert blocks the air hole in elvie

Enter Legendairy Milk silicone breast shields/flanges (that come with our collection cups or separately) to save the day!

The 24 mm Legendairy Milk silicone flange can fit into the 28 mm Elvie flange without blocking the flange’s air holes. You can then add your inserts to the 24 mm flange to get the diameter you need and provide the length that may be needed for longer or excessively elastic nipples.   

28mm Elvie flange and 24mm Legendairy flange

The fit is a bit tight, so it does require some wiggling and pressure to get the Legendairy 24 mm silicone flange into the Elvie 28 mm hard flange, but once that is securely in, you can add your inserts into the Legendairy flange. You may need to do a U fold or “tulip” fold (anyone familiar with reusable menstrual cups? That’s the same fold you would use) and then flatten out the folds so that you have a smooth tunnel transition.

It’s also important to note that the Legendairy flange will not sit flush with the Elvie flange, but there is enough stability for the pump to comfortably sit against your breast/chest and within your bra to provide you a comfortable, hands-free, pumping session.

u fold or tulip fold of flangeclose up on the fold before flatteningflange all smoothed outinsert without blocking air holes for proper suction

The Legendairy Milk inserts work well in this setup also! You may find yourself needing to do the U fold or “tulip” fold mentioned above to get the insert in comfortably but once you’ve smoothed everything out, you’re good to go!

u fold or tulip fold on 19mm Legendairy Milk insert19mm Legendairy Milk insert inside 24mm Legendairy Milk flange inside 28mm Elvie flange


Statistically many pumpers need even smaller flange sizes than 19 mm, which is why we now offer sizes 15mm, 17mm, 19mm and 21mm


If you have any questions or need help troubleshooting, reach out to us via email or on social media.

 Shop This Blog



  • Hi! Would this work with the Elvie Stride as well? Thanks!

  • Hey there! I use the 21mm Elvie OG Pump. I previously sized myself as a 20mm. What size should I purchase in the silicone insert?
    Legendairy Milk replied:
    That’s a great question! Please email us at info@legendairymilk.com and we’ll be more than happy to help.

    Bri Katz
  • Is there a similar hack to the Elvie stride ? I have elastic nipples and I can’t empty my breast. I use the 28 mm

  • When I did this and then tried to snap my nursing bra back is compresses the pump against my breast. Is that right? I used the bra extenders that came with the pump.

  • Will this hack work the same for the Elvie Stride pump as well?

    Stephanie Appleby

Leave a comment

Please note, comments must be approved before they are published